Exhibitornews K Trade Fair 2013

Back overview

BUSS AG
Trade fair debut in PVC compounding; quantec G3 – higher
performance at lower cost

Deutscher Text >>>

Starring at the K 2013 trade fair this year (October 16 to 23 in Düsseldorf) will be the new BUSS quantec G3 compounder for processing polyvinyl chloride (PVC) into high grade pellets. This third-generation version of the high-performance BUSS quantec Kneader series features further improvements including a bigger processing window, greater throughput, and still higher product quality. BUSS has also managed to reduce not only the investment cost of this machine, but also the specific processing costs.

BUSS - Quantec G3
The BUSS quantec G3 Kneader debut at the K 2013 trade fair sets new benchmarks in throughput, product quality and cost economy for PVC compounding

The quantec G3 incorporates twelve years of BUSS 4-flight technology know-how and experience. Its key mechanical and technological features are the longer process section, now extended to 14 L/D (L = process section length, D = screw diameter) – for better mixing and greater throughput – and the larger intake zone diameter. Smooth transition to the smaller mixing/kneading zone diameter is facilitated by tapered liners according to specific product requirements. Furthermore, the outer screw to shaft diameter ratio has been increased to 1.62. This increases the available throughput volume at constant speed.

A key distinguishing feature of the quantec G3 with regard to product quality is the patented design of its screw flights. Their optimized free-form surface geometry ensures a constant shear gap between the flights and kneading pins – over the entire length of the screw flight. This geometry plays a decisive role in particularly gentle kneading and mixing, by maintaining constant shear force on the product and thereby eliminating any risk of local overheating.

The segmented mixing and kneading screw is freely configurable: various conveying, mixing and kneading elements can be installed on the shaft according to PVC compound quality requirements.

The quantec G3 is delivered as a turnkey compounding line. This is the first BUSS Kneader to incorporate a fully optimized feed system upstream, and downstream a throughput-optimized single shaft discharge extruder with pelletizer. Heating/coo- ling units for the mixing/kneading zone and discharge extruder are built into the machine and fully piped, as well as electrical heating for the other zones. The control cabinet is mounted directly on the machine, and is fully wired and tested before leaving the works. This saves several weeks of on-site manpower for installation and commissioning – only the power, water and compressed air supplies have to be connected.

The quantec G3 is state-of-the art for all PVC-compounding needs and user requirements. BUSS not only sets a new technological benchmark thereby for this heat and shear sensitive product, but also lowers the cost threshold for compounding lines.


Visit us at the K exhibition. We would be pleased to meet you on our booth (hall 16, booth A59).

Buss AG - LogoBuss AG
Hohenrainstrasse 10
CH-4133 Pratteln

Tel. +41 61 825 66 00
Fax +41 61 825 68 58

info@busscorp.com
www.busscorp.com

 

Button Print

Button Top

K Messe 2016

 Startseite                            
 Suchen                                
 Videothek 2016                

 

Messeinformationen

 Daten und Fakten              
 Unterkunftsmöglichkeiten
 Anreise                               
 Messevideos                     
 Besucherzielgruppen        
 Tipps für Besucher            
 Tipps für Aussteller           
 Impressum / Kontakt         

 

K Messe 2013

 Ausstellernews 2013        
 Videothek 2013

 

K Messe  2010

 Ausstellernews 2010        
 Videothek 2010                

 

K Trade Fair 2016

 Home                                 
 Search                               
 Video clips 2016               

 

Trade Fair information

 Facts and Figures             
 Accommodation                
 Arrival                                 
 Trade fair videos               
 Visitor target groups         
 Contact                               

 

K Trade Fair 2013

 Exhibitor news 2013
 Video clips 2013

 

K Trade Fair 2010

 Exhibitor news 2010          
 Video clips 2010               

 

 

 

K - Startbild

Save the date:
16.10. - 23.10.2019

www.k-online.de





www.kunststoff-schweiz.ch
www.kunststoff-deutschland.com

K Messe Spezial

Das Spezial-Portal rund um die K Messe - präsentiert von
Kunststoff-Schweiz und Kunststoff-Deutschland
 

Kunststoff-Deutschland